The Jeanneau 410 is perfect for no matter what kind of sailing you enjoy – from day sailing to cruising with the family. Enchantee is a 3 Cabin / 2 head layout with the upgraded grey cedar interior and ocean blue upholstery. The large rectangular “Queen” size berth in the forward owner’s cabin with ensuite is both spacious and comfortable. The U-shaped galley mid-ship with stove/oven, microwave, and large refrigerator makes cooking a pleasure.
Isophtalic NG gelcoats used to ensure bright and lasting finish. Polyester resins used throughout. Each batch of resin and gelcoat receives laboratory testing before use. Finite element analysis was performed in high-load areas during the engineering process.
Vacuum infused with discontinuous, end-grain balsa. Solid laminate in keel area. Barrier coat used to guard against osmosis.
3rd Generation counter-molded structure glued and laminated to hull for strength. High-load zones cut-out for access to the hull. Subflooring in saloon area framed with aluminum.
Hull ports in acrylic, bonded from exterior
COMPOSITE BULKHEADS are vacuum infused and fully laminated 360 degrees
BILGE AREAS finished with a gelcoat paint
DECK is vacuum infused with discontinuous, end-grain balsa. Wood coring used in high-load areas. Proprietary and highly-effective non-skid pattern is molded into side decks and coachroof
WINGED SHOAL KEEL – epoxy encapsulated cast iron 5′ 2′
FULLY BALANCED SPADE RUDDER uses stainless steel cables driven by sprockets in the steering consoles.
JEFA, AUTO-ALIGNING BEARINGS
MASTHEAD with 2 aft sheaves for main halyard and boom topping lift and 1 spinnaker sheaves forward
MAST COLLAR (keel-stepped mast) in anodised aluminum
MAIN CHAINPLATES in 316 stainless steel at deck edge
LED 360° ANCHOR LIGHT
1 FORWARD SHEAVE for genoa halyard
COMBINATION STEAMING AND DECK LIGHT
RIGID VANG with control line lead aft to the cockpit
WATERTIGHT THROUGH DECK FITTING with Harken mast base blocks
STANDING RIGGING is discontinuous Dyform wire rigging
RUNNING RIGGING
• Sheets and halyards in ultra low-stretch Dyneema
• Additional lines in low-stretch polyester
INVERTER 2000W
MAIN ELECTRIC PANEL
USB PLUGS at chart table for recharging mobile devices
LED INTERIOR LIGHTING
COURTESY LIGHTING
GENERATOR
The highest quality components, sourced from the leading suppliers, make up the standard deck equipment. Harken and Spinock equipment is used extensively. Exterior wood used in cockpit and on side decks is Teak.
Geona
Mainsail
ANCHOR
Windlass, anchor, and anchor locker with double access hatches from the deck and location for manual handle and bitter end attachment point
FIXED STEMHEAD FITTING in 316 stainless steel with anchor roller
ATTACHMENT POINT for Code 0 or asymmetrical spinnaker on bow
MOORING CLEATS
St. Augustine Sailing Enterprises, 3076 Harbor Drive,
Camachee Cove Yacht Harbor, St. Augustine, Florida 32084
© Saint Augustine Sailing
Website Designed by Copper Coin Design