








2018 BENETEAU OCEANIS 45
2018 Beneteau Oceanis 45 – Luxury, Performance, and Innovation – ICW Friendly & Shoal Draft
Experience the perfect blend of elegance, comfort, and performance aboard this 2018 Beneteau Oceanis 45. True to Beneteau’s tradition, this sailing vessel is the result of years of innovation and a meticulous focus on design, delivering an exceptional sailing experience.
Designed for safety and stability, the Beneteau Oceanis 45 features a distinctive hard chine, providing increased interior space and improved offshore handling. The large cockpit is a standout, boasting dual carbon fiber wheels at the helms, spacious seating, and an open deck plan for effortless movement. One of the most sought-after features is the electric drop-down transom, which transforms into a generous swim platform—perfect for relaxing at anchor.
Step inside to discover a beautifully appointed three-cabin, two-head layout, skillfully designed to maximize both comfort and functionality. The contemporary light oak interior gives the space a bright and airy feel, complemented by ultra-leather salon cushions for a luxurious touch. The well-equipped galley and salon offer ample storage, seating, and premium finishes, making extended cruising a true pleasure.
SPECIFICATIONS
CONTACT A BROKER
ACCOMMODATIONS:
- 3 Cabin, 2 Heads – Light Oak interior
- Cabin sole: No maintenance synthetic cabin sole
- Nav Station to port, sliding table / seats
- Dinette table to starboard, convertible
- Master Cabin is forward with a centerline berth
- 2 Guest Cabins to aft with full berths
- 2 Heads with electric toilets, sinks and showers
- Engine Yanmar Diesel:- 57 HP / 57HP Common Rail, Sail Drive – around 1,000 hours
- Engine control – Control panel in the port cockpit
- Engine compartment: Soundproofing foam – Ventilation:
- 1 air intake and 1 air outlet
- 1 Alternator 12 V / 125 Amp
- 1 Rotomolded diesel tank 53 US Gal (under port aft berth) – Electronic gauge – Low level alarm
- 1 Rotomolded diesel tank 19.8 US Gal
- Filters: Sea water – Diesel – Water separator
- Fixed three blade propeller
- Engine access through companionway (opening with 2 gas pistons) – 2 Engine access through aft cabins
SAFETY ON DECK
- 1 Open stainless steel forward pulpit – Step
- 2 Stainless steel aft pushpits
- 1 Ring lifebuoy bracket
- 1 Outboard engine bracket
- Welded ring on pushpit for flag
- Double life lines and stainless steel stanchions –
- Side boarding gate on either side
SAIL LOCKER
- Access through deck hatch T60
- Stainless steel ladder
- Shelving unit
COCKPIT
- Self-bailing cockpit
- 2 Cockpit locker
- 2 Lockers in cockpit floor under helm’s feet
- 1 Liferaft locker under helm seat, in cockpit bottom
- 1 Gas locker for bottle(s) under the port helm seat
- Natural solid wood slatted cockpit benches
- 2 Steering wheel consoles: Carbon Fiber – Steering gear at the helm station – Metal cable transmission system – Stainless steel handrail – Cup holder
- 1 Deck filler for access to tiller system + Power supply access hatch
- 1 Emergency tiller
- 2 Steering compass on consoles
- Portside engine control and control panel
- Polyester cockpit table – 2 leaves – Glove boxes – 2 Large storage space – 2 Stainless steel handrails – 12 V Power outlet – Lamp with shade
- 1 Cold water cockpit shower
- 1 Fixed composite arch – Built-in lighting
- 2 Hinged PMMA companionway doors – Sliding hatch made of PMMA
SWIM PLATFORM / STERN DECK
- Fully opening transom, convertible into swim platform
- Electrically operated
- Natural solid wood decking on swim platform
- 1 Stainless steel swim/boarding ladder – Solid wood steps – Folding
INTERIOR
- Woodwork Alpi Light Oak
- Parquet type laminated floors
- Padding upholstery in salon and cabins
- Fabric upholstery: Ultraleather in the fields / Vinyl: Anthracite
- Marine mattresses in the cabins
COMPANIONWAY
- Headroom: 2,00 m / 6’7’’
- Wooden salon companionway with molded wood hanging steps with non-slip surface
- 2 Stainless steel handrails
SALON Headroom: 1,97 m / 6’6’’
- U-shaped salon bench – Double density foam
- Central seating on pantograph
- Salon table in 1 piece – Varnished wood top with inlay – Aluminum legs
- Mirror on bulkhead
- Cupboard units – Cubby hole lockers and storage along the hull – Storage under bench seats • Cubbyholes with stainless steel beading
- 2 Panoramic deck house windows with concertina blinds
- 2 Hull portholes with curtain
- 2 Opening portholes on coaming in side windows
- 1 Opening deck hatch with mosquito screen/blind
CHART TABLE – PORTSIDE
- Sliding, can be configured with the armchairs – Placed against the forward bulkhead , against the galley or between the 2 mobile seats
- Table with flap – Molded wood fiddle
- Switch panel on bulkhead for access to electrical functions
- 1 Reading light
GALLEY – PORTSIDE Headroom: 6’7’’
- L-shaped kitchen
- Countertop of synthetic surfaces
- Stainless steel sink 2 rectangular basins
- 1 Mixer tap with hot/cold water under pressure
- 1 Gas stove 3 burners – Stainless steel oven on gimbal – Stainless steel protection handrail
- Microwave
- 22 US Gal icebox, front & top opening
- 34 US Gal refrigerator (12V), front opening
- Fitted cupboards and closed cubbyholes
- 1 Lower unit: 1 Drawer – 2 Shelves
- 1 Opening portlight with curtains in the coach roof side window
- Storage space along the hull
FORWARD CABIN Headroom: 6’2’’
- Central double bed
- Hanging lockers – Glove box – Cubby hole locker – Lower unit – Stowage under platform
- 3 Flush deck hatches with mosquito screen/blind
- 2 Hull portholes with curtain
ENSUITE – STARBOARD FORWARD HeadrooM 6’1’’
- Access through forward cabin
- Manual marine toilet • 164L / 17 US Gal Rigid holding tank
- Molded basin – Mixer shower (hot/cold water) • Separate shower –
- 1 mixing tap hot/cold water •
- 1 Mirror
- Cabinet
- Toilet accessories
- Cupboard
- 1 Deck hatch with mosquito screen/blind
- Headroom: 6’5’’
- 1 Double bed – Marine mattress
- Access door to starboard aft head
- Cupboard units – Hanging locker – Closed cubbyholes
- Storage each side of bed
- 1 Hull portholes with curtain
- 1Cockpit windows with curtains
- 1 Cockpit porthole with curtain
- 1 Deck hatch with mosquito screen/blind
- B & G VHF V50 mounted in the salon w B & G H50 portable handheld
- GPS Plotter – B & G Zeus3 13″ Flush mounted on center aft of cockpit table
- GPS Plotter – B & G Zeus3 7″ Flush mounted at port and starboard helm
- Compass – 5″ Plastimo Olymipic 135 mounted at each helm
- Stereo – 12V Poly Planar MRD80i mounted in the salon
- Auto Pilot – B & G Triton2 flush mounted at port helm
- Wind Indicator B & G Triton2 Flush mounted at each helm
- Depth / Speed – b & G Triton2 flush mounted at each helm
- Chain Counter – quick CHC 1203 chain counter flush mounted at port helm
- Stereo – Fusion MS-RA205 flush mounted in salon
- Antennas – VHF, GPS, and AIS
- 12 V Circuit
- 110 V Circuit
- Generator: Onan 7.5 kw wit sound shield – @750 hours
- Air Conditioning – 3 Dometic units, 1 16,000 BTU marine ac unit under dinette settee, 8000 BTU unit under the forward berth, 12,000 btu between port and starboard berths.
- Bow Thruster -Quick Model BTQ1801512 with controls at the helm
- House (4) Group 31 AGM Batteries, Engine, Genset, Bow Thruster batteries all replaced 3/2023
- 1 Load balancer
- 12 V Electrical panel (Fuses – Voltmeter – Water gauge – Fuel gauge – Battery warning – Fuel warning – Water warning)
- 1 12 V Power outlets
- Lighting: Overhead lights – Reading lights – White strip lighting
- Navigation lights: 1 Forward and aft navigation lights – 1 Steaming light – 1 Mooring light on masthead • Wire runs for optional cables
- 2000 W inverter
- 2 Shore power cores 30 amp service each
- LED Nav, Interior lights
- 1 Rotomolded freshwater tank 87 US Gal (Forward cabin)
- 1 Rotomolded freshwater tank 53 US Gal
- Water pressure system – Expansion tank – Inline filter
- 11 US Gal Electric water heater (engine use)
- 1 Rigid black water holding tank for each WC – gravity drains
- Delayed shower draining and electric shower drain pumps
- 1 Electric bilge pump – 1 Manual bilge pump
- 1 Electric pump for the ice box drain
SAILS
- Main: Neil Pryde Dacron w/Vertical Battens, UV cover replaced
- Genoa: Neil Pryde Dacron, UV Cover replaced
RIGGING
- ICW Friendly In-Mast Furling – 63’6″ anodized aluminum deck stepped, with stainless steel compression post to the keel.
- 2 aft-swept spreaders
- Anodized aluminum boom
- Discontinuous stainless steel standing rigging
- 2 Backstays with turnbuckles
- Rigid boom vang
- Genoa furling system with drum on the deck
- 2 Stand Up blocks on mainsheet arch
- 2 Genoa tracks with piston adjusted traveler cars
- 2 Genoa sheet turning blocks
- Rigging run back to cockpit (except boom topping lift)
- Complete running rigging:
- Main halyard,
- Genoa halyard with clutch on mast and cleat,
- Boom topping lift with cleat on mast,
- Mainsheet,
- 2 Genoa sheets
- 2 Reefing lines,
- 1 Manual reef
- 7 Clutches
- 2 Halyard bags
MOORING-ANCHORING GEAR
- 1 Delta plow with approx 75′ of chain and 150′ of rode
- Self-draining chain locker – Clench bolt – Hatch cover
- Single roller stainless steel bow fitting with offset roller
- 1 12 V – 1000 W vertical electric windlass – Remote control in anchor locker and chin counter at port helm
- 6 Aluminum mooring cleats – Stainless steel chafing plate
- Dodger – Grey
- Bimini – Grey